PayPal & Sizes & Ordering

All orders will be processed using PayPal Secure Payment Processing payment gateway. Orders can be paid for using a Credit Card or a PayPal account.

For helpful hints and advice on tool sizes and ordering > click here for full details >

Show Cart
Your Cart is currently empty.
Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

Crobalt and CoHSS Cutting Tips

 

Crobalt® cast alloy is an alternative tool bit to the 1/4" HSS tips usually used in the Diamond Tool Holders, it's ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminium oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium, there is no iron or steel in the alloy.

For more information on Crobalt® click the link below to go to our information page.

Crobalt cutting tools 

The prices below are per piece, they come with square cut ends to be ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit.


Prices for Australian customers including 10% GST.

Crobalt® tool bits

1/4" x 1:1/2" (6.35mm x 38mm) square tool bit = $14.30 each

1/4" x 3" (6.35mm x 75mm) square tool bit = $27.50 each

5/16" x 1:1/2" (8mm x 38mm) square tool bit = $17.60


 

1/4" x 1:1/2" (6.35 x 38mm) round tool bit = $17.60

5/16" x 1:1/2" (8mm x 38mm) round tool bit = $19.80


 

High Speed Steel (CoHSS/M42) tool bits.

1/4" x 1:1/2" (6.35mm x 38mm) square tool bits = $9.90

5/16" x 1:1/2" (8mm x 38mm) square tool bits = $13.20




1/4" x 1/4" x 1:1/2" (38mm) Crobalt Cutting Tips

$13.00



1/4" x 1/4" x 3" (75mm) Crobalt Cutting Tips

$25.00



1/4" x 1: 1/2" Round Crobalt

$16.00



1/4" x 1:1/2" M42 CoHSS

$9.00



5/16" x 1:1/2" Round Crobalt

$18.00



5/16" x 5/16" x 1:1/2" CoHSS

$12.00



5/16" x 5/16" x 1:1/2" Crobalt Tool Bits

$16.00
These tool bits have one end pre-cut to approximately the correct compound angle for the Diamond Tool Holder, meaning less initial grinding. 
Product Details...




  • «« Start
  • « Prev
  • 1
  • Next »
  • End »»


Display #  
Results 1 - 7 of 7