Manufacturers of innovative workshop tooling, and weird stuff

/Acute%20Tool%20Sharpening%20System
The Acute Tool Sharpening System has been designed as an easily built and cost effective way to make the shaping and sharpening of a wide range of tool bits and cutters in the workshop as simple as possible.
/Crobalt®%20Cast%20Alloy%20Cutting%20Tools
Crobalt has been manufactured in the USA since the 1920s and is a cast alloy made from 50% Cobalt, with the other 50% being Tungsten, Chromium, their carbides and some other additives.
/Diamond%20Tool%20Holder
The Diamond Tool Holder was originally developed in Australia by Des Burke in 1985 and manufactured by him until 2006. The name came from the shape the tool bit takes on when seen from above.
/The%20FoR%20(Front%20or%20Rear)%20Inverted%20Parting%20Tool
The FoR (Front or Rear) Inverted Parting Tool Holder operates with the blade held upside down and can be used in a front or rear tool post.
/The%20Turnado%20Freehand%20Metal%20Turning%20System
Turn large and small internal and external radii at any position on the workpiece. Adaptable to fit on the cross slide of virtually any small to medium sized lathes, and quick to swap over in place of the top slide.
/"T"%20Type%20Parting%20Off%20Blades
The premium quality blades we stock are sourced from the largest manufacturer of repetition lathe tooling in the USA. The blades have a slight hollow grind along the top (bottom) cutting edge which assists in curling the chip for easier ejection from the cut.

Helpful Videos

The Turnado System
The Diamond Tool Holder - Features and Tips
The Acute Tool Sharpening System #10 - Sharpening a two flute end mill
The Acute Tool Sharpening System #1 - BuildingThe Table
The Acute Tool Sharpening System #2 Building the Work Arm Part 1
The Acute Tool Sharpening System
Browse, order and pay amazing tools here. Powered by Paypal
Latest news, events and projects we are working on. Facebook and Instagram feed.
This is a selection of photos of projects that I have been involved with, some were made on commission, others just for fun.
Call, email or fill up the form if you have any enquiries. We will get back to you shortly.
You can either email me directly @ gary@eccentricengineering.com.au. Call or text me at +61 400653503. OR you can use the contact form in Contact us page if you prefer.
© 2023 by Eccentric Engineering. All rights reserved.
We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.